Skip to content
GTRS Forged Performance Not wheels — completion of the car. 6061-T6 Forged Aluminium · Porsche-Specific Fitment

GTRS CUSTOM PROJECTS

Custom Order

Custom Order is the starting point for projects that require individual fitment, a non-standard vehicle application, a Special Order finish or a specification outside the current Configurator reference.

Fitment Scope Modified & Non-Standard Builds
Surface Scope Special Order Finishes
Engineering Check Reviewed Before Confirmation
Order Workflow 01–05 Structured Stages
3D CAD front and rear GTRS forged wheel geometry developed for an individual Porsche specification
Application-Specific CAD Development Geometry · Clearance · Construction · Finish

01 / WHEN CUSTOM ORDER IS USED

When Custom Order Is Used

Standard Porsche applications can be configured directly in the GTRS Configurator. Custom Order serves projects whose geometry, hardware, or finish goals step outside standard reference presets.

USE CASE 01

Modified Porsche Applications

Vehicles with altered track width, non-stock hub conversions, or multi-system chassis modifications requiring individual fitment review.

USE CASE 02

Wide-Body or Restomod Projects

Coachbuilt arches, wide-body conversions, and classic or modern restomod builds with custom front and rear fender extensions.

USE CASE 03

Aftermarket Brakes

Big brake kits, oversized rotors, or motorsport calipers requiring verification of radial (A–D) and axial protrusion (E–F) envelopes.

USE CASE 04

Custom Suspension Geometry

Coilover conversions, air suspension systems, adjustable control arms, or dedicated camber settings that shift inner and outer arch clearance.

USE CASE 05

Non-Standard Dimensions

Requests for specific diameters, wheel widths, or custom ET targets outside the preset options shown in the public Configurator.

USE CASE 06

Individual Concavity or Lip Requirements

Projects prioritizing maximum spoke concavity, stepped or deep-lip outer profiles, or two-piece Duo-Block rim-to-center proportions within brake limits.

USE CASE 07

Special Order Finish Requests

Individual colour directions, bespoke brushed or tinted clear-coat combinations, and multi-component surface coordination beyond standard presets.

USE CASE 08

Workshop or Dealer Projects

Specialist Porsche workshops, restomod builders, and trade partners coordinating technical specifications on behalf of a client vehicle.

USE CASE 09

Porsche Applications Not Yet Represented in the Public Configurator

Earlier air-cooled generations, rare limited-production variants, or special-series Porsche models not listed in the standard selector.

Feasibility Boundary: Custom Order does not promise universal compatibility. Every request is assessed individually against structural load requirements, brake and suspension clearance, and 6061-T6 forged manufacturing limits before a specification is confirmed.

02 / PROJECT TYPES

Four Principal Custom Order Tracks

Whether your project begins from a modified chassis, an architectural proportion goal, a Special Order surface, or a workshop commission, GTRS structures the review around the relevant technical inputs.

TRACK 01 · CHASSIS & HARDWARE

Modified Brake, Suspension & Wide-Body Applications

When the vehicle’s brakes, suspension geometry, or bodywork have been modified from factory specification, standard offset tables no longer apply. GTRS coordinates the wheel width, offset, and spoke backpad geometry with the actual physical clearance envelope.

Aftermarket Brakes Wide-Body / Restomod A–F Measurement Reference
TRACK 02 · ARCHITECTURE & PROPORTION

Non-Standard Dimensions, Concavity & Lip Depth

For clients seeking specific front and rear widths, custom offset targets, deeper spoke concavity, or a particular Monoblock Deep Lip or two-piece Duo-Block profile, GTRS evaluates how the requested proportion interacts with the hub pad and caliper face.

Monoblock / Deep Lip Duo-Block Staggered Profile
TRACK 03 · SURFACE & MATERIAL

Special Order Finishes & Model Programs

When a project calls for a Special Order finish or coordination with model-specific capabilities—such as the M2 Barrel Program, M3 Surface Program (Single Paint or Dual Paint), or Aero ring architecture on eligible designs—GTRS confirms feasibility and quotation details before ordering.

Special Order Finish M2 / M3 Programs Aero Family
TRACK 04 · UNLISTED & TRADE PROJECTS

Unlisted Porsche Models & Workshop Commissions

If your Porsche generation or variant is not yet represented in the public Configurator, or if a workshop or dealer is commissioning a build with specific tire and alignment targets, GTRS establishes the application parameters directly with you or your technician.

Unlisted Porsche Generations Workshop & Dealer Builds

03 / PROJECT INFORMATION

Information Required for Technical Assessment

Depending on the scope of your project, GTRS may require the ten categories of vehicle and design information below. You can start the discussion with the details you already have.

ITEM 01

Porsche model, generation and year

Exact chassis generation, variant (e.g., Carrera, Turbo, GT3, RS), and model year.

ITEM 02

Existing front and rear wheel dimensions

Current diameter, width (J), and offset (ET) on both axles where known.

ITEM 03

Existing tire sizes

Current or planned front and rear tire dimensions and intended driving use.

ITEM 04

Brake package

Factory iron, PCCB ceramic, or aftermarket caliper and rotor specification.

ITEM 05

Suspension and body modifications

Coilovers, air suspension, lowering springs, camber plates, spacers, or arch work.

ITEM 06

Preferred wheel design

Selected GTRS model code or preferred construction and spoke architecture.

ITEM 07

Mounting type

Exposed 5 Lugs, Genuine Center Lock, or 5 Lugs with Center-Lock-Style Cover where eligible.

ITEM 08

Finish direction

Standard, Premium, or Special Order colour, brushed texture, and clear-coat sheen.

ITEM 09

Project photographs

Reference views of the vehicle stance, wheel arch relationship, and brake caliper clearance.

ITEM 10

Advanced Fitment measurements where required

Front and rear A–F caliper and hub protrusion dimensions when hardware is modified or unlisted.

04 / FITMENT & ENGINEERING REVIEW

Fitment and Engineering Review

Every Custom Order undergoes an engineering check before any final specification or production drawing is released.

GTRS reviews the vehicle application, fitment, construction, mounting and requested finish before a final specification is confirmed.

04.A · Brake & Hub Envelope

Caliper Clearance & Mounting Datum

Spoke backpad thickness, barrel contour, center bore, and drive-shaft protrusion are checked against the vehicle’s front and rear brake package and hub interface.

04.B · A–F Measurement Coordination

When Workshop Measurements Are Requested

If the vehicle carries aftermarket brakes, custom uprights, or modified suspension geometry, GTRS uses the approved A–F measurement system to verify radial caliper distances (A–D) and axial protrusion beyond the wheel mounting surface (E–F).

04.C · Review Boundary

Confirmed Before Manufacture

There is no automatic approval workflow for Custom Order projects. GTRS confirms the final front and rear specification in writing before production starts.

Approved GTRS A–F front and rear brake and hub measurement reference diagram
Approved A–F Measurement Reference Used when non-stock brakes or modified suspension geometry require workshop verification.
3D CAD cross-section showing spoke concavity depth and barrel profile
Spoke Concavity Envelope Developed within verified brake and arch limits.
CAD section of center bore, hub mounting pad step, and cap interface
Center Bore & Hub Pad Geometry Machined to the confirmed vehicle interface.

05 / FINISH & CONSTRUCTION REVIEW

Finish and Construction Review

Architectural construction and surface finish are reviewed alongside fitment so that blank selection, machining geometry, and coating stages are aligned before production.

CNC-machined split-spoke GTRS forged wheels resting on 6061-T6 blanks
6061-T6 Forged Construction Monoblock, Deep Lip, and two-piece Duo-Block architectures.
Completed GTRS forged wheel set in satin champagne finish staged for inspection
Surface & Finish Coordination Standard, Premium, and Special Order surface treatments.
05.A · Forged Wheel Constructions

Monoblock, Deep Lip & Two-Piece Duo-Block

GTRS confirms whether the selected wheel design and target dimensions use Monoblock, Monoblock Deep Lip or Duo-Block construction. Duo-Block uses a separate face-and-barrel architecture.

05.B · Surface Tiers & Special Order

Standard, Premium & Special Order Finishes

Projects requesting a Special Order finish—or combining finishes through eligible M2 Barrel or M3 Surface programs—are reviewed for surface preparation and finish compatibility.

06 / CUSTOM ORDER PROCESS

Five Stages From Project Brief to Production

Custom Order follows the same commercial, payment, and production release rules as standard GTRS orders once the final specification is confirmed.

STAGE 01

01 — Project Information

Share your Porsche model, year, brake and suspension modifications, preferred wheel design, and desired fitment or finish direction.

STAGE 02

02 — Technical Review

GTRS reviews the vehicle application, fitment, construction, mounting and requested finish, and requests A–F measurements where required.

STAGE 03

03 — Final Specification

Front and rear wheel dimensions, offsets, construction, mounting interface, finish specification, and total order summary are confirmed with you.

STAGE 04

04 — Payment

The complete order total, including delivery, is paid online before production. Available payment methods are shown at checkout.

STAGE 05

05 — Production

Production begins after payment and final specification confirmation, and typically requires 20–27 days after final design approval and confirmed payment.

Payment Policy

The complete order total, including delivery, is paid online before production. Available payment methods are shown at checkout.

Production Release & Timing

Production begins after payment and final specification confirmation. Production typically requires 20–27 days after final design approval and confirmed payment. Timing can vary according to construction, finish, factory schedule and configuration complexity.

Quality Control & Dispatch

The completed wheel set is inspected before packing. Quality-control photos or video are provided before shipment, and tracking and dispatch details are provided after the wheel set is handed to the carrier.

07 / BEGIN YOUR CUSTOM PROJECT

How to Start a Custom Order

Discuss your vehicle, fitment goals or Special Order finish directly with GTRS through our Contact page, email or WhatsApp.

PRIMARY CONSULTATION ROUTE

Contact GTRS

Use the GTRS Contact page or direct channels below to share your Porsche model, modifications, preferred wheel design, and project photographs.

Request Custom Porsche Fitment & 3D Spec Sheet

Share your Porsche generation, brake setup, and target stance. A GTRS fitment engineer will verify offsets (ET) and reply within 24 hours.

Or Chat on WhatsApp ↗

GTRS CUSTOM PROJECTS

Ready to Discuss Your Specification?

Start a Custom Order discussion with GTRS, review the A–F caliper and hub measurement guide in Advanced Fitment, or return to the Porsche Configurator for standard applications.