Modified Porsche Applications
Vehicles with altered track width, non-stock hub conversions, or multi-system chassis modifications requiring individual fitment review.
GTRS CUSTOM PROJECTS
Custom Order is the starting point for projects that require individual fitment, a non-standard vehicle application, a Special Order finish or a specification outside the current Configurator reference.
01 / WHEN CUSTOM ORDER IS USED
Standard Porsche applications can be configured directly in the GTRS Configurator. Custom Order serves projects whose geometry, hardware, or finish goals step outside standard reference presets.
Vehicles with altered track width, non-stock hub conversions, or multi-system chassis modifications requiring individual fitment review.
Coachbuilt arches, wide-body conversions, and classic or modern restomod builds with custom front and rear fender extensions.
Big brake kits, oversized rotors, or motorsport calipers requiring verification of radial (A–D) and axial protrusion (E–F) envelopes.
Coilover conversions, air suspension systems, adjustable control arms, or dedicated camber settings that shift inner and outer arch clearance.
Requests for specific diameters, wheel widths, or custom ET targets outside the preset options shown in the public Configurator.
Projects prioritizing maximum spoke concavity, stepped or deep-lip outer profiles, or two-piece Duo-Block rim-to-center proportions within brake limits.
Individual colour directions, bespoke brushed or tinted clear-coat combinations, and multi-component surface coordination beyond standard presets.
Specialist Porsche workshops, restomod builders, and trade partners coordinating technical specifications on behalf of a client vehicle.
Earlier air-cooled generations, rare limited-production variants, or special-series Porsche models not listed in the standard selector.
Feasibility Boundary: Custom Order does not promise universal compatibility. Every request is assessed individually against structural load requirements, brake and suspension clearance, and 6061-T6 forged manufacturing limits before a specification is confirmed.
02 / PROJECT TYPES
Whether your project begins from a modified chassis, an architectural proportion goal, a Special Order surface, or a workshop commission, GTRS structures the review around the relevant technical inputs.
When the vehicle’s brakes, suspension geometry, or bodywork have been modified from factory specification, standard offset tables no longer apply. GTRS coordinates the wheel width, offset, and spoke backpad geometry with the actual physical clearance envelope.
For clients seeking specific front and rear widths, custom offset targets, deeper spoke concavity, or a particular Monoblock Deep Lip or two-piece Duo-Block profile, GTRS evaluates how the requested proportion interacts with the hub pad and caliper face.
When a project calls for a Special Order finish or coordination with model-specific capabilities—such as the M2 Barrel Program, M3 Surface Program (Single Paint or Dual Paint), or Aero ring architecture on eligible designs—GTRS confirms feasibility and quotation details before ordering.
If your Porsche generation or variant is not yet represented in the public Configurator, or if a workshop or dealer is commissioning a build with specific tire and alignment targets, GTRS establishes the application parameters directly with you or your technician.
03 / PROJECT INFORMATION
Depending on the scope of your project, GTRS may require the ten categories of vehicle and design information below. You can start the discussion with the details you already have.
Exact chassis generation, variant (e.g., Carrera, Turbo, GT3, RS), and model year.
Current diameter, width (J), and offset (ET) on both axles where known.
Current or planned front and rear tire dimensions and intended driving use.
Factory iron, PCCB ceramic, or aftermarket caliper and rotor specification.
Coilovers, air suspension, lowering springs, camber plates, spacers, or arch work.
Selected GTRS model code or preferred construction and spoke architecture.
Exposed 5 Lugs, Genuine Center Lock, or 5 Lugs with Center-Lock-Style Cover where eligible.
Standard, Premium, or Special Order colour, brushed texture, and clear-coat sheen.
Reference views of the vehicle stance, wheel arch relationship, and brake caliper clearance.
Front and rear A–F caliper and hub protrusion dimensions when hardware is modified or unlisted.
04 / FITMENT & ENGINEERING REVIEW
Every Custom Order undergoes an engineering check before any final specification or production drawing is released.
GTRS reviews the vehicle application, fitment, construction, mounting and requested finish before a final specification is confirmed.
Spoke backpad thickness, barrel contour, center bore, and drive-shaft protrusion are checked against the vehicle’s front and rear brake package and hub interface.
If the vehicle carries aftermarket brakes, custom uprights, or modified suspension geometry, GTRS uses the approved A–F measurement system to verify radial caliper distances (A–D) and axial protrusion beyond the wheel mounting surface (E–F).
There is no automatic approval workflow for Custom Order projects. GTRS confirms the final front and rear specification in writing before production starts.
05 / FINISH & CONSTRUCTION REVIEW
Architectural construction and surface finish are reviewed alongside fitment so that blank selection, machining geometry, and coating stages are aligned before production.
GTRS confirms whether the selected wheel design and target dimensions use Monoblock, Monoblock Deep Lip or Duo-Block construction. Duo-Block uses a separate face-and-barrel architecture.
Projects requesting a Special Order finish—or combining finishes through eligible M2 Barrel or M3 Surface programs—are reviewed for surface preparation and finish compatibility.
06 / CUSTOM ORDER PROCESS
Custom Order follows the same commercial, payment, and production release rules as standard GTRS orders once the final specification is confirmed.
Share your Porsche model, year, brake and suspension modifications, preferred wheel design, and desired fitment or finish direction.
GTRS reviews the vehicle application, fitment, construction, mounting and requested finish, and requests A–F measurements where required.
Front and rear wheel dimensions, offsets, construction, mounting interface, finish specification, and total order summary are confirmed with you.
The complete order total, including delivery, is paid online before production. Available payment methods are shown at checkout.
Production begins after payment and final specification confirmation, and typically requires 20–27 days after final design approval and confirmed payment.
07 / BEGIN YOUR CUSTOM PROJECT
Discuss your vehicle, fitment goals or Special Order finish directly with GTRS through our Contact page, email or WhatsApp.
Use the GTRS Contact page or direct channels below to share your Porsche model, modifications, preferred wheel design, and project photographs.
Share your Porsche generation, brake setup, and target stance. A GTRS fitment engineer will verify offsets (ET) and reply within 24 hours.
Start a Custom Order discussion with GTRS, review the A–F caliper and hub measurement guide in Advanced Fitment, or return to the Porsche Configurator for standard applications.